Classic Army CA36C Airsoft Electric Gun

Classic Army CA36C Airsoft Electric Gun This is one of the best gun Classic Army has made to date. The reinforced composite body is extremelty realistic. Classic Army CA36C Metal parts include: Full barrel, front RIS rails, front sling mount, front sight, mock bolt, trigger, selector lever, rear sight, rear sling mount, stock latch.

The Classic Army CA36C is a shortened version of the Classic Army CA36 automatic electric rifle model. The CA36K is equipped with open sights that is fitted, but it does not have any carry handle. Its foregrip has hard points to both the left and right sides where the aiming devices is fitted. It also comes with prefitted lower rail. In the real world, the unit is intended for use in confined places.

Rifle Markings: The serial numbers for the Classic Army CA36C serials are all the same due to its moulding limitations. It has not changed since the first prototype mould therefore it is lacking a unique serial number as well as logos unlike those of M15s.

Rifle Sling Points: The CA36C has four sling points as mentioned. One is located next to the stock hinge on the left hand side, another one is at the rear of the stock. Things are slightly different at the front. There are two fixture points on both sides of the forward hand stop.

Rifle Metal Parts: The CA36 sports a metal subframe that adds to the rigidity, just like the TM CA36 design. The metal parts include the front rail and sling points, the muzzle, front barrel, ejection point sights, fire select switch and the internals. Its gearbox is the same as those found in the AK47 Electric Airsoft Rifle. Its motor is mounted in a reinforced metal chassis bolted to the gearbox itself. It is quite strong for a plastic replica.

Rifle Sights: The CA CA36 comes with fitted open sights and both the front and rear sights are made with metal. The front sight is quite the standard HK style foresight. The rear sight is adjustable and contains a flip-up aiming device with differing diameters.

Folding Buttstock: The buttstock for the CA36 rifles is the standard side-folding skeleton and it is the shorter variation for the CA36C gun. It folds to the right side and secures against the shell deflector. The good thing about this skeleton buttstock is that when it folds, it does not interfere with the gun's operation.

It is not possible however to fold the stock when the mag well is clipped onto the left since it will obscure things.

There is a series of holes on the underside of the stock. These holes give the CA-CA36C shooter something to secure the receiver and foregrip pins with especially when repairing or upgrading the rifle.

The real CA36 series manufactured by genrmany are equipped with a bolt catch. This catch automatically holds the bolt in a rearward position when the rifle is cocked , when the magazine is empty, or when the last round is spent. The bolt catch can also be engaged manually by depressing a button located at the front inside of the trigger guard and retracting the cocking handle. When the empty magazine is removed and replaced with a new one, the bolt catch can be released by cocking the gun further back. For the Classic Army CA36C, the bolt release is just for decoration purposes and does not do anything.