|
Loose Safety Selector (For AK series)
Last Updated: 07/29/2009
|
If your selector is loose, please follow the instruction below
1. pop off the cap of the selector switch with a small screw driver.
2. you should see a screw under the cap.
3. tighten the screw to comfort level (do not turn too tight)
selector should be working again.
this moving part will get loose in time, please repeat the process above once a while.
If your selector is mis-aligned, we suggest you to take off the screw and re-align the selector switch with the gun.
take all screws out and place the selector switch to full auto. press it tight and ensure all align and tighten it back.
If you see any worn parts in the selector its time to replace it, worn corners cannot hold the switch correctly.
|
|
