 |
 |
 |
 |
|
 |
|
Features
- Accessories Included
- 1 standard Tamiya connector with Temperature Sensor.
- 1 adapter from standard Tamiya to Mini Tamiya.
- 1 adapter from standard Tamiya to a pair of alligator clip.
- Smart Charger Specification
- FOR 6V-12V NiMH/NiCD Battery Packs 5-10 Cells Packs
- Input: AC 100-240V
- Output: 6-12V, 1A or 2A
- Operation Instruction
- Connect battery pack to output connector and plug AC power source
- Make sure battery polarity is connected correctly (Red wire is positive)
- Charger will detect battery voltage automatically, Red LED will be on during charging
- When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
- Battery will be charged at 1A or 2A constant current (selectable)
- Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery
- The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun
- Don't charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh
- Battery pack must be made by high drain current cell
- Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse.
|
|
|
|
|
|
|
five star 
