Shopping Cart
[0 ITEMS • $0.00] 

Shop All

Featured Products

Get Connected is an Upfront Merchant on TheFind. Click for info.

HACKER SAFE certified sites prevent over 99% of hacker crime.

  Home > New Arrivals >

Universal Balance Smart Charger TB6 All in One & Power Supply NiMH/NiCD/Li-PO/Li-Fe/SLA
Universal Balance Smart Charger TB6 All in One & Power Supply NiMH/NiCD/Li-PO/Li-Fe/SLA
Universal Balance Smart Charger TB6 All in One & Power Supply NiMH/NiCD/Li-PO/Li-Fe/SLA

Click to see more Photos

Airsoft Retail $130.00 Airsoft $99.95

Stock Status: In Stock & Ready to Ship

Availability: Usually Ships in 1 to 2 Business Days


BB Bullet:


The Best ALL-IN-One Universal Charger in the Market

Various Connectors Supported:

  • Hitech
  • JST
  • Deans
  • Tamiya
  • Traxxas

No extra hassle of trying to find connector adapters, or worrying about if your Hobby battery pack is supported.

Supports multiple types of battery packs with one single charger! The follow packs are supported:

  • NiMH/NiCD 1~15 cells ( 1.2v to 18v)
  • Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v)
  • Li-Fe 1~6 series
  • Sealed Lead Acid (SLA)

Charger Specifications:

  1. Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries
  2. Build-in Balance
  3. Temperature Sensor
  4. DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit.
  5. Hook up with Car Battery and you can charge your battery anywhere.


Operating voltage

DC 11~18 volts
AC 100~240V, 50/60Hz

Charge/discharge power

max. 50/5 Watts


1~15 cells


1~6 series



Charge current

0.1 to 5.0A

Discharg current

0.1 to 1.0A

No. of cycle

1 to 5 times

Battery data memory

up to 5 data




160x120x40 mm

User's setting-up parameters

Battery voltage type

LiIo:3.6V, LiPo:3.7V, LiFe:3.3V

NiCd Delta-peak voltage sensitivity

1 to 20mV

NiMH Delta-peak voltage sensitivity

1 to 20mV

Battery temperature cut-off

20 to 80C or OFF

Waiting time between charge/discharge

1 to 60 min.

Integral timer limit for safety

10 to 720 min.or OFF

Maximum charging capacity limit for safety

10 to 9990mAh or OFF

Key beep and buzzer sound


Input DC power low alert

10 to 11V

  • New Page 1
  • Optimized operating software

  • When charging or discharging, TB6 has an 'AUTO' function that sets the
  • feeding current or the cell count of the battery automatically. Especially
  • for Li-ion/Li-Polymer batteries, it can prevent the over-charging can lead
  • to an explosion by users fault. Every program in the unit is controlled with
  • mutual links and communication for every possible error so it introduces a
  • maximum safety. These can be set at users option.

  • Dual input power

  • TB6 employs the circuit that can be operated with the input power of
  • AC(Alternating Current) or DC(Direct Current). For AC input, it contains a
  • AC-DC switching power supplier which has 5A of power capacity and maximum
  • output power of 50Watts for charging. As a result it can charge up to 16
  • cells of NiCd/NiMH and 6 series of Li-ion/Li-Polymer batteries with maximum
  • current of 5.0A.

  • Individual voltage balancer for Li-ion/Li-Polymer batteries inside

  • TB6 has an individual-cell-voltage balancer inside. So it does not need any
  • balancer separately when charging Li-ion/Li-Polymer batteries (LiIo/LiPo/LiFe)
  • for cell voltage balancing.

  • Balance individual cells on discharge

  • TB6 also can monitor and balance individual cells of the battery pack during
  • the discharge process. If the voltage of any one cell varies abnormally, the
  • process will be stopped with the error message.

  • Accept various types of battery

  • TB6 can accept three types of batteries - LiIo, LiPo and LiFe. They have
  • different characteristics by their chemistry. You can select any one of them
  • that you are going to process before the job.

  • Battery 'Fast' and 'Storage' mode

  • You can charge Li-ion/Li-Polymer battery for special purposes. 'Fast' charge
  • reduces the charging time of battery and 'Storage mode controls the final
  • voltage of the battery to be suit for long time storage.

  • Data store/load

  • For users convenience it can store maximum 5 data of different batteries.
  • You can establish the data contains program setting of the battery to charge
  • or discharge continually. These data can be called out at any time you need
  • and the process can be executed without program setting.

  • Cyclic charging/discharging

  • Perform 1 to 5 cycles of charge>discharge or discharge>charge continually
  • for battery refreshing and balancing.

  • PC based analysis using USB communication

  • For technical expert, BC6 offers PC based program can analysis the
  • characteristic of the battery by USB port. It shows a graph of voltage,
  • current, capacity and temperature curves. It also shows the individual
  • voltage of each cell in the battery pack.

  • Robust outer aluminum case

  • High-quality aluminum case is durable and very efficient to cool out the
  • internal heat

  • Warning

      • Use special caution when
      • working with Li-ion cells, they are very sensitive to charging
      • characteristics and may explode if mishandled.
      • NOTE: Please do NOT
      • charge 2 NIMH packs in serial or parallel
      • Protective Circuit Board is
      • required when making packs
      • Make sure user has enough
      • knowledge on Li-Ion rechargeable batteries in charging, discharging and
      • assembly before use.
      • Put the batteries in fire-proof
      • container in charging
      • Never leave batteries
      • unattended when charging
      • Do not put batteries on
      • wood surface or carpet when charging
      • We are not responsible for any
      • damage caused by misuse or mishandling of  Li-Ion batteries in charging
      • We are not responsible for damage
      • caused by other Li-ion batteries not supplied from us
      • Do not make any changes to the
      • charger, charger accessories or connectors, as this might cause
      • electrical shortage, fire or over-heating during charging. We are not
      • liable for the product is any changes are made to the charged
      • accessories or connectors.
  • Download TB6 software - windows Edition here.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Airsoft BBs 6mm Ammo
New Arrivals
Airsoft BBs 6mm Ammo > Chargers